Architectural Shingles
Laminated, dimensional shingles that replaced three-tab as the standard. Heavier, better in wind, and longer lasting. Easy to repair and widely available.
Whether the roof is leaking now or you just need someone to look at it, one call to +1-833-818-0925 connects you with an independent licensed and insured roofing contractor in Big Stone County. A real person answers every call, any hour.

People across Big Stone County call this line when they need a roofer and don't want to spend the evening leaving voicemails. It might be a leak over the kitchen, a hailstorm that rolled through the county, or a home sale that hinges on a roof report. Whatever the reason, the call gets answered.
Roofing rules often change at the county line. Permit requirements, inspection timing, and even which building code edition applies can vary between the county and the incorporated cities inside it. We route your call to an independent contractor who already works in Big Stone County and deals with those details regularly.
Not every Big Stone County call is an emergency. Some want a remaining-life opinion on an older home, some need a rental roof fixed between tenants, and some want a second look after a door-knocker's dramatic claims. Those calls get the same careful routing.
Let's be clear up front: Metal Roofing in Bucks is not a roofing company, and we don't pretend to be one. We run a free referral line. When you call +1-833-818-0925, a dispatcher listens to what is happening with your roof, asks the questions a seasoned roofer would ask, and routes your call to an independent, licensed and insured roofing contractor who works in Big Stone County. From that point on, the quote, the work, and any workmanship warranty belong to that independent contractor.
Fair question: why go through a referral line at all? Because the hardest part of a roof problem is usually the first hour. You need to know who actually answers at nine at night, who works on standing seam metal instead of only asphalt, who will climb a low-slope commercial roof with a rooftop unit on it, and who handles small repairs instead of chasing only full replacements. Sorting that out alone usually means a pile of voicemails and a long wait. Our job is to shorten that to one call.
Here is what to expect when you dial. The dispatcher will ask about your roof type and approximate age, whether water is coming inside right now, whether a storm or a falling limb is involved, whether you have opened an insurance claim, and how a contractor can reach the roof safely. Those answers decide which kind of pro gets your call, so the first person to show up is the right person. The referral itself costs you nothing.
In the interest of full transparency, here is how this service is funded. The line costs callers nothing; participating independent contractors may pay us a referral fee. That fee never shows up as a separate charge on your quote, and it doesn't change your right to get other bids, ask hard questions, or say no.

A roof leak and a roof replacement are different jobs, often handled by different crews. The independent contractors we route calls to cover the full range below, and the dispatcher's job is to send each call to the pro whose daily work matches your roof. Here is what that work actually involves.
If you're not sure which category your problem falls into, that's normal and it's what the dispatcher is for. Describe what you're seeing, inside and out, and the call gets routed from there.
When water is coming through a ceiling, nobody wants a sales pitch. They want the leak stopped. Emergency calls get routed to contractors who keep reinforced poly tarps, 2x4 battens, cap nails, and roofing cement on the truck. A proper emergency tarp is not a sheet tossed over the ridge with bricks on top. It is stretched past the damaged area, wrapped around battens, and fastened so wind can't get underneath and peel it back. Where a limb has punched through the decking, the contractor may need to cut the broken sheathing back to the rafters before anything can be sealed.
Indoors, keep it simple: kill power to wet fixtures, clear the room, and catch the water. If a ceiling is bulging with trapped water, stay out from under it. Photograph everything before cleanup starts; adjusters want to see the damage as it was found. Most homeowner policies expect you to take reasonable steps to prevent further damage, and a documented temporary repair is usually part of that.
Keep in mind that temporary repairs are meant to buy time, not to last. UV breaks poly tarps down within a few months, and wind works at every fastener. Schedule the permanent repair once the adjuster has visited; a tarp that stays up too long can end up letting water into the very decking it was protecting.
A leaking roof is not automatically a dead roof. The most common repair calls we hear about come down to a handful of parts: cracked rubber collars on plumbing vent boots, loose or rusted step flashing where a roof meets a sidewall, nail pops that have pushed up through a shingle, wind-lifted tabs whose sealant strip has let go, and worn ridge cap. Caught early, each of those is a focused repair rather than a big project.
An honest roofer will also say when a repair would only be a short-term patch. If shingles are brittle enough to crack when lifted, if granules are washing into the gutters by the handful, or if the same slope keeps leaking in new places, the conversation shifts. Shingle matching is another real issue. Discontinued colors and older three-tab profiles can be hard to blend, so ask the contractor how close the match will be before work starts. Expect a written scope that names the exact components being replaced.
Flashing is behind a surprising share of repair calls. Chimneys need step flashing tied into the shingles plus counterflashing cut into the mortar joints, and wide chimneys need a cricket on the uphill side to split the water. With skylights, the leak is usually at the curb flashing, not the glass itself. Caulk over a flashing problem rarely lasts, so ask the contractor whether the flashing itself is being replaced.

A replacement is the biggest roofing decision most owners ever make, so the details deserve attention. On a full tear-off, the contractor strips the old roofing to the deck, then checks the sheathing for soft spots, delamination, and rot. Bad decking gets replaced before anything else goes down. Then come the layers: drip edge, ice and water shield in the vulnerable areas, synthetic underlayment, starter strips, the roofing itself, and the ridge and flashing details.
Ventilation is where a lot of new roofs quietly fail. Intake at the soffits and exhaust at the ridge need to be balanced, or heat and moisture build up in the attic and shorten the life of the new roof. Ask each contractor about their venting plan, the permit, and who schedules the final inspection. New construction, additions, and garage roofs follow the same rules, with extra care at tie-ins where a new roof plane meets an old one. A clean job ends with a magnetic sweep of the yard and driveway for stray nails.
When you compare replacement bids, compare the scope, not just the total. Look for how many layers are being removed, the price per sheet for any decking replacement, the brand and type of underlayment, whether ice and water shield is included and where, how the ventilation will be handled, and whether drip edge and pipe boots are new or reused. A low bid that reuses worn flashing or leaves out ice barrier often costs more in the long run.
Metal roofs behave differently from shingles, and they need a contractor who works on them every week. Standing seam systems hide their fasteners and use clips that let the panels expand and contract with temperature. Exposed-fastener panels, the ribbed style common on barns, shops, and many homes, are screwed straight through the face, and each screw relies on a rubber washer to stay watertight. After years of sun those washers dry out and crack, and the screws back out a little more every season.
Many metal roof leaks are fixed by replacing worn screws with slightly oversized ones and new washers, resealing laps, and replacing tired closure strips at the ridge and eaves. For new metal roofs, the contractor will talk through panel profile, gauge, and finish, and whether snow guards make sense over doors and walkways. If you are thinking about metal over an existing shingle roof, ask how they will handle the substrate and ventilation.
People always ask whether a metal roof is loud in the rain. Over solid decking with underlayment and attic insulation, it is usually no louder than shingles. The loud version people remember is metal over open framing on a barn or shed. Metal also weighs less than most other roofing, sheds snow well when installed with the right details, and lasts for decades with basic upkeep.

Commercial roofs are mostly low-slope membranes, and they call for a different skill set than a pitched house roof. The common systems are TPO and PVC single-ply membranes with heat-welded seams, EPDM rubber, modified bitumen, and older built-up roofs. Most leaks on these roofs start at the edges and penetrations: rooftop unit curbs, pipe supports, drains, scuppers, and parapet wall flashings.
Standing water that lingers for days after a rain is a warning, not a cosmetic issue. It points to clogged drains, sagging deck, or insulation that has compressed. Commercial contractors may take core cuts or use an infrared moisture survey to map wet insulation under the membrane, which tells you whether a repair, a restoration coating, or a re-roof is the smart spend. If your tenants or customers can't be disrupted, ask about after-hours scheduling.
Restoration coatings have changed the math on a lot of commercial roofs. If the membrane is mostly dry and structurally sound, a silicone or acrylic coating system over repaired seams can add years of service at a fraction of re-roof cost. But if the insulation underneath is soaked, coating over it only hides the problem. A good contractor will show you the moisture data before recommending either route.
Storm damage often hides in plain sight from the driveway. Hail can bruise shingles and fracture the mat underneath while leaving the surface looking fine at a glance, and wind can break the seal on tabs without tearing them off. An experienced pro checks dents in gutters and vent caps first, then examines test squares on each roof slope. That documentation helps when you meet your insurance adjuster. Be wary of anyone who offers to cover your deductible; in many places that is illegal.
Inspections are not only for storms. Home buyers, sellers, and owners who received a letter from their insurer about roof condition all call for inspections. A thorough one covers the roof surface, flashing, ventilation, and the attic side, where daylight through the decking or dark stains on rafters tell their own story. Routine maintenance, such as clearing gutters and valleys, resealing flashing, and trimming overhanging limbs, is the cheapest way to add years to any roof.
A simple routine catches most problems early. Look at the roof from the ground each spring and fall, and after any major storm. Check for missing or lifted shingles, dark streaks, sagging lines along the ridge, and granules piling up at downspout outlets. And after a heavy rain, a quick look around the attic with a flashlight is one of the best checks you can do. If anything looks off, call for a professional look before the next storm season.
Not sure what is on your roof? Here's a quick field guide to the materials contractors in our network work with every week.
Laminated, dimensional shingles that replaced three-tab as the standard. Heavier, better in wind, and longer lasting. Easy to repair and widely available.
The thin, flat shingles common on roofs from earlier decades. Many are aging out, and matching them for repairs is often tricky. Usually a signal that replacement planning should start soon.
Smooth metal panels joined by raised, locked seams with hidden fasteners. Lasts for decades, sheds snow, and avoids exposed screws entirely. Higher upfront cost than shingles.
Ribbed panels screwed directly through the face, common on barns, shops, and budget-minded homes. Cost-effective and tough, though fasteners need checking every several years.
Heavy, long-lasting tiles common in warm and coastal climates. The tile itself can last for generations; it is usually the underlayment underneath that wears out. Walking on tile takes care and experience.
The standard systems for commercial and low-slope roofs. TPO and PVC have heat-welded seams, EPDM is a rubber sheet glued or ballasted, and modified bitumen goes down in torch-applied or self-adhered layers. Each has its own repair methods.
Five steps, start to finish. You stay in control of every decision.
Once the call is routed, expect the contractor to reach out directly to set a time. No call back within the window you were given? Ring the line again and we'll chase it or find another pro. You are never obligated to hire anyone we connect you with.
Dial +1-833-818-0925 any hour. A live dispatcher picks up, not a voicemail box or a web form.
We ask about your roof type, age, active water, storm history, and access, which takes about two minutes.
Your call goes to an independent contractor who works throughout Big Stone County and handles your type of roof.
The contractor inspects the roof, explains what they found, and gives you a written price before work begins.
Once you approve, the contractor completes the work, cleans up, and walks you through what was done.
On the first visit, a thorough contractor typically checks:
A referral line is only worth calling if it makes the next hour easier. Here is what you can count on from us, and what is up to the contractor.
Some things are within our control, like answering fast and routing well. The work itself is the contractor's, and we say so plainly.
The contractors in our network quote in writing before work starts, so there are no surprise line items after the shingles come off. If a quote is vague, ask for the scope to be itemized.
The line is staffed 24/7, holidays included. Arrival times vary with storms and distance, and you will hear a realistic estimate, not a sales line.
Your call goes to someone who works locally and already knows the permit process and the common roof problems nearby.
Calls are routed to independent licensed and insured contractors. Before work starts, ask for a certificate of insurance and confirm any required license with your local or state agency.
Asphalt, metal, tile, and flat membrane roofs each need different tools and experience. The dispatcher's whole job is matching your roof type and problem to the right kind of pro.
If the first contractor can't fit you in or isn't a good fit, call back and we will try to connect you with another independent pro. The referral is always free.
Because the network includes repair-focused pros, a small problem gets treated as a small problem. If someone tells you the whole roof is shot, you can always call back for a second opinion.
Residential calls go to residential roofers, and commercial calls go to contractors who work on low-slope membranes, coatings, and rooftop equipment. That way the first visit is useful.

Whoever you hire, these are the questions worth asking first. Watch for red flags too: pressure to sign the same day, a large cash deposit before materials arrive, an offer to cover your insurance deductible, or a contractor who won't put the scope in writing.
These are the kinds of calls that come in every week, and how they usually play out.

A storm drops a limb through the garage roof just before midnight. The dispatcher flags it as active damage and routes it to a contractor with emergency tarping gear, who covers the opening that night and comes back to quote the decking and shingle repair once the insurer has seen it.
The roof is only twelve years old, so the owner suspects bad shingles. The contractor finds the real cause at a sidewall where step flashing was never tucked behind the siding. The fix is a focused flashing repair, not a new roof.
Strangers start knocking after a hailstorm. The owner calls us, connects with a local pro, and goes into the adjuster meeting with real documentation instead of a stranger's word. The claim moves forward on photos, measurements, and test squares.
A home sale is two weeks from closing when the buyer's inspection report says the roof needs further evaluation. A roofing contractor inspects it, lists two repairs with photos, and the seller handles them before closing.
A small restaurant has a drip near the hood vent every time it rains. The commercial contractor finds a clogged drain causing ponding and a split seam at the rooftop unit curb, then schedules the repair before opening hours.
An older exposed-fastener roof drips from many screw holes. A metal specialist swaps the fasteners and reseals the laps instead of replacing panels. The roof stays in service for years, and the owner spends a fraction of what new metal would cost.
These are composite examples of the kinds of calls we route, written to show how the process works. They are not individual customer reviews.
It depends on where you are in Big Stone County, the weather, and contractor schedules that day. Active leaks are prioritized, and a same-day or next-morning visit is common. After a big storm, waits run longer because everyone needs a roofer at once.
Calls from rural roads and unincorporated communities in Big Stone County are welcome. Availability can be thinner far from town, and some contractors charge a trip fee for longer drives, so ask about that when they call you.
Full roof replacements usually require a permit, while small repairs often don't, but the rules depend on whether you are inside a city or in unincorporated Big Stone County. The contractor should know which office to file with and should schedule the final inspection. Unpermitted roof work can cause trouble when you sell or file a claim.
Absolutely. Buyers often request a roofer's opinion when the home inspection flags the roof. You'll get photos, an estimate of remaining life, and pricing for repairs, which is useful during negotiations.
We don't price jobs ourselves; the independent contractor does. Ask for an itemized scope that names materials, decking allowances, and cleanup. Calling the referral line is free.
Emergency calls cover active leaks, storm damage, fallen trees and limbs, missing shingles or panels after wind, and temporary dry-in when a permanent fix can't happen right away. The contractor will usually tarp or seal the area first, document the damage, and quote the permanent repair once it is safe and dry. If there is sparking, a sagging ceiling, or structural collapse, call 911 first.
Our network is made up of independent licensed and insured contractors. Licensing rules vary from place to place, so always ask for the contractor's license information and a certificate of insurance before work starts, and verify it yourself. That check takes five minutes and is worth it.
Many contractors will document damage with photos and measurements and meet your adjuster on the roof, which helps the adjuster see what you're seeing. Your policy and claim decisions stay between you and your insurance company. Read your policy for deductible and depreciation terms, and be cautious of anyone offering to cover your deductible.
Age, condition, and how widespread the problem is are the three big factors. One failed pipe boot on a ten-year-old roof is a repair. Brittle, curling shingles, heavy granule loss, and leaks in several places on an older roof usually point to replacement. Ask the contractor to show you photos of what they found either way.
Most single-family asphalt roofs are torn off and replaced in one to three days, depending on size, pitch, layers, and weather. Metal, tile, and commercial jobs run longer. The contractor will usually schedule around the forecast, and decking surprises can add a day.
We route roofing calls from every part of Big Stone County, including its cities, towns, suburbs, and rural areas. Each call goes to an independent contractor who already works in the county.
Big Stone County has a little of everything when it comes to roofs. Older homes may have two or three layers of shingles that have to come off before a new roof goes on. Newer subdivisions mostly have architectural shingles that are reaching their first replacement. Farm buildings and shops often have exposed-fastener metal, and commercial strips usually have low-slope membranes. Each type goes to a contractor who works on it routinely.
Property type matters as much as location. A metal pole barn, a 1950s ranch with two layers of shingles, and a strip center with a rubber membrane each go to a different kind of contractor, and the dispatcher sorts that out on the first call.
Weather in Big Stone County leaves its mark on roofs in predictable ways. Wind lifts tabs, heavy rain finds weak flashing, and sun dries out the sealant around vents. Contractors who work in the county see these patterns every season and know where to look first.
Timing matters too. After a widespread storm, every roofer in Big Stone County gets busy at once, and the dispatcher will tell you honestly what wait to expect. For non-urgent work, calling outside storm season usually makes things easier.
Below you'll find the cities and zip codes in Big Stone County. Pick yours, or call +1-833-818-0925 and we'll route you.

Dial +1-833-818-0925 day or night for an independent local roofing contractor in Big Stone County, at no cost to you.